Banjo fittings is designed with different hose end connections, you will have a good ideas types of hose connections in banjo fittings catalogue as follows:
Banjo crimp fittings for parker hydraulic hose used in heavy duty equipment, such as hydraulic excavator, forklift, tractor and truck etc. The design standard of hose barbed ends is referenced by DIN EN 14423, the coupling design of hose banjo crimp fittings is assembled by hose ferrule crimped into banjo hose fittings.
Banjo fittings with hose barbed type for push on hose connection, used in low pressure without any crimped or clamping system for water and pneumatic purpose. It is also called push on hose fittings banjo types.
Banjo fittings with beaded form tube ends for hose connections and hose fittings, general application in low pressure automotive and hydraulic systems on automotive, industrial andn commercial product. Meet SAE J1231 standard, it is connected by hose clamp SAE J1508.
Banjo fittings with reusable ferrule socket end for field attachable the specified hose, it is Screw-On Hose Fittings for Air and Water, female ferrule connector screws directly onto rubber hose without the need for a separate adapter. You’ll need a female connector (ferrule) and a male adapter (stem) with the same hose ID to make a connection. Screw the female connector onto hose, then thread the male adapter into the female connector. When assembled, the fitting compresses against the hose, forming a strong seal. Also known as reusable fittings, they can be unscrewed from the hose end and used on a new hose.
If you don’t find what you need, please send email to firstname.lastname@example.org