[[TitleIndustry]]

SAE J846 fittings Coding Systems Identification Fluid Conductors Connectors

Date:Jul 10, 2019

SAE J846_201511 is Coding Systems for Identification of Fluid Conductors and Connectors fittings.

 SAE_J846_fittings_Coding_Systems_dash_number_tube_thread_table_1_2

SAE J846 is being revised to add identification codes for SAE J534 lubrication (grease) fittings, SAE J518-3 two-bolt flanges, SAE J518-4 and SAE J518-5 flange adapter blocks, and SAE J1926-4 heavy duty Straight Thread O-Ring plugs.

 SAE_J846_fittings_Coding_Systems_dash_number_100R_hydraulic_hoses_table_3

SAE_J846_fittings_Coding_Systems_dash_number_100R_hydraulic_hoses_table_3_continue 

SAE J846 fittings reference standards as follows:

SAE J246 Spherical and Flanged Sleeve (Compression) Tube Fittings

SAE J512 Automotive Tube Fittings

SAE J513 Refrigeration Tube Fittings - General Specifications

SAE J514 Hydraulic Tube Fittings

SAE J515 Specification for Hydraulic O-Ring Materials Used with Hydraulic Connections

SAE J516 Hydraulic Hose Fittings

SAE J517 Hydraulic Hose

SAE J518-1 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Screw Flange Connection Part 1: 3.5 MPa to 35 MPa (Code 61)

SAE J518-2 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Screw Flange Connection Part 1: 42 MPa (Code 62)

SAE J518-3 Hydraulic Flange Clamps, 2-Screw Connection to be used with J518-1 (Code 61) Connections where only low pressure is required

SAE J518-4 In-line, Elbow, and Tee Flanged Connectors for use with SAE J518-1/ISO6162-1 Components

SAE J518-5 In-line, Elbow, and Tee Flanged Connectors for use with SAE J518-2/ISO6162-2 Components

SAE J530 Automotive Pipe Fittings

SAE J531 Automotive Pipe, Filler, and Drain Plugs

SAE J532 Automotive Straight Thread Filler and Drain Plugs

SAE J534 Lubrication Fittings

SAE J1231 Formed Tube Ends for Hose Connections and Hose Fittings

SAE J1453-1 Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests

SAE J1453-2 Specification for O-Ring Face Seal Connectors: Part 2 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with ISO 6149-2 Metric Stud Ends

SAE J1453-3 Specification for O-Ring Face Seal Connectors: Part 3 - Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with SAE J1926-2 Inch Stud Ends

SAE J1926-1 Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing

SAE J1926-2 Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 2: Heavy-Duty (S Series) Stud Ends

SAE J1926-3 Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 3: Light-Duty (L Series) Stud Ends

SAE J1926-4 Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 4: External Hex and Internal Hex Inch Port Plugs – Dimensions, Design, Test Methods and Requirements

SAE J2494-1 Dimensional Specifications for Metallic Body Push-to-Connect Fittings Used on a Vehicle Air Brake System

SAE J2494-2 Dimensional Specifications for Non-Metallic Body Push-to-Connect Fittings Used on a Vehicular Air Brake System 

SAE J2552 Push-On Hose and Mating Hose Fittings

SAE_J846_4_blot_split_flanges_connection_Coding_Systems_dash_number_tube_thread_table_4

SAE_J846_straight_thread_filler_drain_plug_Coding_Systems_dash_number_table_5A

SAE_J846_Tube_port_ends_metric_base_fittings_Coding_Systems_dash_table_5B

Previous: SAE J246 Spherical Flanged Sleeve Compression Tube Fittings standard

Next: SAE J1926 vs ISO 11926 fittings port stud tool spec standards