[[TitleIndustry]]

SAE J1677 hydraulic tubing tests procedures standard

Date:Jul 20, 2019

SAE J1677_201612 Standard is intended to establish uniform methods for testing certain types of carbon steel and high strength, low alloy steel tubing for SAE hydraulic tube fittings usage. The specified test and performance criteria applicable to each variety of tubing are set forth in the respective SAE J Specifications.

 

SAE J1677 referenced standards as follows:

SAE J356 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading

SAE J518 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type

SAE J524 Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring

SAE J525 Welded and Cold Drawn Low-Carbon Steel Tubing Annealed for Bending and Flaring

SAE J526 Welded Low-Carbon Steel Tubing

SAE J527 Brazed Double Wall Low-Carbon Steel Tubing

SAE J533 Flares for Tubing

SAE J1065 Nominal Reference Working Pressures for Steel Hydraulic Tubing

SAE J1453-1 Specification for O-Ring Face Seal Connectors: Part 1—Tube Connection Details and Common Requirements for Performance and Tests

SAE J1453-2 Specification for O-Ring Face Seal Connectors: Part 2—Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Caps, and Connectors with ISO 6149-2 Metric Stud Ends

SAE J1453-3 Specification for O-Ring Face Seal Connectors: Part 3—Requirements, Dimensions, and Tests for Steel Unions, Bulkheads, Swivels, Braze Sleeves, Connectors, Caps, and Connectors with SAE J1926-2 Inch Stud Ends

SAE J2435 Welded Flash Controlled, SAE 1021 Carbon Steel Tubing, Normalized for Bending, Flaring, and Beading 

SAE J2467 Welded and Cold-Drawn, SAE 1021 Carbon Steel Tubing Normalized for Bending and Flaring

SAE J2592 Carbon Steel Tubing for General Use—Understanding Nondestructive Testing for Carbon Steel Tubing

SAE J2613 Welded Flash Controlled, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending

SAE J2614 Welded and Cold-Drawn, High Strength Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending and Flaring

SAE J2832 Welded Flash Controlled, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Double Flaring

SAE J2833 Welded and Cold-Drawn, High Strength (690 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Stress Relieved Annealed for Bending and Flaring

ASTM A 370 Standard Methods and Definitions for Mechanical Testing of Steel Products

ASTM A 450/A 450M Standard Specification for General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Tubes

ASTM E 8 Test Methods for Tension Testing of Metallic Materials

ASTM E 8M Test Methods for Tension Testing of Metallic Materials [Metric]

SAE J514 Hydraulic Tube Fittings

SAE J1290 Automotive Hydraulic Brake System—Metric Tube Connections

SAE J2551 Recommended Practices for Fluid Conductor Metallic Tubing Applications

SAE J2593 Information Report for the Installation of Fluid Conductors and Connectors

SAE J2658 Metallic Tube Conductor Assemblies for Fluid Power and General Use—Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies

 

The related ISO standards as follows:

ISO 2944 Fluid power systems and components—Nominal pressures

ISO 3304 Plain end seamless precision steel tubes—Technical conditions for delivery

ISO 3305 Plain end welded precision steel tubes—Technical conditions for delivery

ISO 4397 Connectors and associated components—Nominal outside diameters of tubes and nominal inside diameters of hoses

ISO 4399 Connectors and associated components—Nominal pressures

ISO 4406 Hydraulic fluid power—Fluids—Method for coding the level of contamination by solid particles

ISO 5598 Fluid power systems and components—Vocabulary

ISO 6162-1 Hydraulic fluid power—Flange connectors with split or one-piece flange clamps and metric or inch screws—Part 1: Flange connectors for use at pressures of 3.5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN127

ISO 6162-2 Hydraulic fluid power—Flange connectors with split or one-piece flange clamps and metric or inch screws—Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPA (400 bar), DN 13 to DN 51

ISO 6605 Tests and test procedures

ISO 8434-1 Metallic tube connections for fluid power and general use—Part 1: 24° Compression connectors

ISO 8434-2 Metallic tube connections for fluid power and general use—Part 2: 37° Flared connectors

ISO 8434-3 Metallic tube connections for fluid power and general use—Part 3: O- ring face seal connectors

ISO 8434-4 Metallic tube connections for fluid power and general use—Part 4: 24° Cone connectors with ring weld-on nipples

ISO 10583 Test methods for tube connections

ISO 10763 Plain-end, seamless and welded steel tubes—Dimensions and nominal working pressures


Previous: SAE J1677 SAE J533 37°45°Flaring test standards

Next: SAE J1231 431592 431992 dimensions long drop ORB male hose fitting