[[TitleIndustry]]

ISO 8434-1 Performance qualification test

Date:Jun 15, 2019

ISO 8434-1 Performance qualification test General, the tube connectors shall meet or exceed the pressure requirements given in Table 1 when tested in accordance with this clause.


Repeated assembly test

The connectors shall pass a repeated assembly test in accordance with ISO 19879.

Proof test

The connectors shall pass a proof test in accordance with ISO 19879.

Burst pressure test

The connectors shall pass a burst pressure test in accordance with ISO 19879.

Cyclic endurance (impulse) test

The connectors shall pass a cyclic endurance test in accordance with ISO 19879. The cyclic endurance

test with vibration specified in ISO 19879 may be used in place of separate cyclic endurance and vibration tests.

Vibration test

The connectors shall pass a vibration test in accordance with ISO 19879. The cyclic endurance test with vibration specified in ISO 19879 may be used in place of separate cyclic endurance and vibration tests.

Leakage (gas) test

The connectors shall pass a leakage (gas) test in accordance with ISO 19879.

Vacuum test

The connectors shall pass a vacuum test in accordance with ISO 19879.



Previous: ISO 8434-1 Overtightening test standard

Next: ISO 8434-1 Procurement information