[[TitleIndustry]]

ISO 1436 pdf standard rubber hose assemblies specification

Date:Jun 19, 2019

ISO 1436 standard is for Rubber hoses and hose assemblies ,Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification.


This ISO 1436 specifies requirements for six types of wire-braid-reinforced hose and hose assembly of nominal size from 5 to 51 plus, for one of the five types (type R2ATS), nominal size 63.

They are suitable for use with:

Oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from −40 °C to +100 °C;

Water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743-4 at temperatures ranging from 0 °C to +60 °C;

Water at temperatures ranging from 0 °C to +60 °C.

1_ISO_1436_standard_pdf_rubber_hose_dimensions_tabel_1

This document does not include requirements for end fittings. It is limited to requirements for hoses and hose assemblies

1_ISO_1436_standard_pdf_rubber_hose_concentricity_tabel_2

1_ISO_1436_standard_rubber_hose_pressures_tabel_34

ISO 1436 standard Classification

Six types of hose are specified, distinguished by their construction, working pressure and oil resistance.

Type 1ST: hoses with a single braid of wire reinforcement and having a thick cover.

Type 2ST: hoses with two braids of wire reinforcement and having a thick cover.

Types 1SN and R1ATS: hoses with a single braid of wire reinforcement and having a thin cover.

Types 2SN and R2ATS: hoses with two braids of wire reinforcement and having a thin cover.



Previous: ISO 3862 pdf standard hose assemblies sprial wire type

Next: ISO 6508 1 2 3 pdf download standard hardness test