[[TitleIndustry]]

DIN 3852-3 vs ISO 6149-1 Metric O-ring port

Date:Jun 01, 2019

DIN 3852-3 is type F stud ends and type W tapped holes with metric fine pitch thread, for use with compression couplings, valves and screw plugs, sealed by O-ring Dimensions.

ISO 6149-1 is Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal.

Drawing_ISO_6149-1

Port_dimensions_ISO_6149-1

DIN 3852-3 is adopted from ISO 6149-1,ISO 6149-2,ISO 6149-3.


DIN_3852_3_dimension_drawings

Thread a d 2(wide narrow) d 3 b d 4 d 5 L 1 L 2 c L 3 L 4 Z°

M8x1  17  14  3  12,5  9,1  1,6  11,5  1  10  12

M10x1  20  16  4,5  14,5  11,1  1,6  11,5  1  10  12

M12x1,5  23  19  6  17,5  13,8  2,4  14  1,5  11,5  15

M14x1,5 25  21  7,5  19,5  15,8  2,4  14  1,5  11,5  15

M16x1,5  28  24  9  22,5  17,8  2,4  15,5  1,5  13  15

M18x1,5  30  26  11  24,5  19,8  2,4  17  2  14,5  15

M20x1,5 33  29  ––  27,5  21,8  2,4  ––  2  14,5  15

M22x1,5  33  29  14  27,5  23,8  2,4  18  2  15,5  15

M27x2  40  34  18  32,5  29,4  3,1  22  2  19  15

M30x2  44  38  21  36,5  32,4  3,1  22  2  19  15

M33x2  49  43  23  41,5  35,4  3,1  22  2,5  19  15

M42x2  58  52  30  50,5  44,4  3,1  22,5  2,5  19,5  15

M48x2  63  57  36  55,5  50,4  3,1  25  2,5  22  15

M60x2  74  67  44  65,5  62,4  3,1  27,5  2,5  24,5  15


DIN 3852-3 and ISO 6149-1 Metric O-ring seal fittings is the same today, we often use ISO standards. 

Picture of Metric O-ring seal to Kobelco metric compression fittings 

Kobelco metric compression fitting connector JIS B2351


Types of DIN 3852-3 fittings and ISO 6149-1 tube fittings as follows:

DIN 2353 24 deg cone tube  to ISO 6149-1 hydraulic fittings
SAE J514 JIC 37 deg flare tube to ISO 6149-1 Adapters 
BS 5200 60 deg cone tube to DIN 3852-3 metric o-ring adaptors
DIN 3860 tube end to ISO 6149  metric  fittings
All types of O-ring seal DIN hydraulic fittings

Types of DIN 3852  ISO 6149 metic o-ring seal to adapter connection

Manufacturing processes of DIN 3852 and ISO 6149 stud  Compression tube fittings as follows:

  1. Material is cutting into piece, or forged body.

  2. CNC machining all ends with precision cutting, one end in one time finished.

  3. Electroplating Zinc Chrome CrVI free, thickness and salt spray test 

  4. Inspection surface and sample check all size

  5. Assebmly the o-ring to Metric stud fittings

  6. Put plastic cap into DIN fittings

  7. Packed in plastic bag, next cartons, next Pallets.

The belowed pictures showing connection of metric o-ring stud fittings usage, all is connect to hydraulic mainfold blocks with Metric port, that is called Port end shapes such as Straight, Elbow, Tee etc, adapters to JIC tube connector, ORFS tube connector, BSP Tube connector etc.



DIN 3852-3  ISO 6149-1 O-ring stud Fitting usage in hydraulic manifold block




Previous: DIN 3863 60° Cone Dimensions

Next: DIN 3852-1 vs ISO 9974-1 Metric thread port