[[TitleIndustry]]

BSP Union fittings 60 cone connector types

Date:Jun 11, 2019

BSP Union fittings is with ISO 8434 6 standard 60 degree cone connector , and male BSPP thread. It is used to connect hydraulic hose assembly or bspp hydraulic adaptors.


NOTE 1 This connector may also be used as a stud connector in association with bonded washer type seals. For rated pressure, consult manufacturer.

NOTE 2 The undercut shown in Figure 34 and Table 22 is preferred for bonded washer type seals.

NOTE 3 S 2 optional hex size is not suitable for bonded washer type seals.

a For details of each end, see Figure 2 and Table 3.

BSP_Union_fittings_60_cone_connector_types_S

Straight connector BSPP Union couplings (S)

90° ° elbow connector BSPP Union couplings (E)

45° ° elbow connector BSPP Union couplings (E45)

Male tee connector BSPP Union couplings (T)

BSP_Union_fittings_60_cone_connector_types_E_T_E45

Dimensions of straight, elbow and tee connectors

BSP_Union_fittings_60_cone_connector_types_dimensions_table

Dimensions in millimetres

l 18 l 19 l 20 S 1 S 2 S 3 Thread Tube OD ±0,5 ±2 ±1,5 min.

G 1/8 A 6 21 20 16 14 12 10

G 1/4 A 8 30 26 21 19 17 14

G 3/8 A 10 35 30 24 22 19 17

G 1/2 A 12 42 35 27 27 22 22

G 5/8 A 16 43 38 30 30 24 24

G 3/4 A 20 47 42 32 32 30 27

G 1 A 25 53 47 35 41 36 36

G 1 ¼ A 32 58 52 37 50 46 46

G 1 ½ A 38 62 60 46 55 50 50

G 2 A 50 70 70 57 70 65 60



Previous: BSP swivel fittings 60 cone connector types

Next: Braze-on nipple fittings dimension BS 5200 ISO 8434 6