In line check valve is belong to one type of the shut-off valves, it is designed with a one piece body and all steel construction, both inlet and outlet ports are female fitting.
A in-line check valve consists of a housing with an integrated valve seat, a tempered and ground closing element (cone) and a pressure spring. Jiayuan manufactures and supplies inline check valves, can meet the needs of clients across a vast range of industries.
These are in-line unidirectional valves with standard spring crack pressures. When the pressure is below the cracking pressure, the spring will close the valve to prevent back-flow in the process.
Inline Check Valves is very importance in Hydraulic Systems, it is used as a directional or pressure control in a hydraulic system.
Block pressure spikes back to the pump.
Prevent Oil Lines from Draining.
Block Oil Flow from the Accumulator.
Prevent Oil Flow from the Online Pump to the Offline Pump.
Our all kinds of in line check valves used in Markets:
Features to our inline check valves:
Metal to metal seating.
Full stainless steel internals is available.
Low cracking pressure.
Variable end connections available
The graphic symbol for a inline check valve is:
Hydraulic Inline Check Valve Technical Characteristics:
Sizes of thread is available in G 1/4, G3/8, G1/2, G5/8, G1, G1 1/4.
Material is C45 Steel and stainless steel.
Inlet Port Ends are Female UNF SAE ORB, BSP port, NPT, BSPT.
Outlet Port Ends are Female UNF SAE ORB, BSP port, NPT, BSPT.
Optional crack pressures available from 1 to 200 psi in 5 psi increments