One Piece Hydraulic Hose Fittings

1 piece hydraulic hose fittings are the most popular of crimp hose couplings, it is designed with permanent pre-crimped ferrule onto hydraulic hose end fittings, to connect no-skive hoses, can be assembled without removing the outer hose covers, eliminating premature hose failure caused by skiving too long or too short. one-piece hose fittings are good for basic applications and quick assembly.

1 piece hydraulic hose fittings are the most popular of crimp hose couplings, it is designed with permanent pre-crimped ferrule onto hydraulic hose end fittings, to connect no-skive hoses,  can be assembled without removing the outer hose covers, eliminating premature hose failure caused by skiving too long or too short. one-piece hose fittings are good for basic applications and quick assembly.

 

Materials of one piece hose fittings are determined by industrial customer usage need such as hydraulic industry standard, constant working pressure, high temperature, low temperature, suction and return.  Stainless steel hose fittings has better anti-rust but expensive, carbon steel hose fittings is cheaper and popular in the world.

Stainless steel 304, 316L, 316.

Carbon steel S20C

Applications used in industrial fields such as Petroleum base hydraulic fluids and lubricating oils, Phosphate-ester base hydraulic fluids.

 

Standards of one piece hydraulic fittings

Iso 12151-1 Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends

Iso 12151-2 Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings

Iso 12151-3 Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends

Iso 12151-4 Part 4: Hose fittings with ISO 6149 metric stud ends

Iso 12151-5 Part 5: Hose fittings with ISO 8434-2 37° flared ends

Iso 12151-6 Part 6: Hose fittings with ISO 8434-6 60° cone ends

 one piece fittings

Markets of one-piece crimped hose fittings:

Transportation

Construction

Agriculture

Forestry

Railroad

Utility Equipment

Personnel Lift Equipment

Oil Field Service

Material Handling

Marine

Paving & Road Maintenance

Industrial

Mining

 

 If you're interested in our line of one piece hose fittings, please send email to jyray@72338.com, download our catalog of one piece hydraulic hose fittings.


Sizes of one piece fittings and two pieces fittings is the same, available in sizes from ¼-inch to 2 inches in a wide variety of end formations, HOSE I.D. (SIZE) is from -4 to -32, 1/2 - 2-1/2 inch, 12.70 - 63.50 mm; 

Port connection is from 1/4 to 2 inch, M4 to M38;  

Flange size is from 1/2 to 2-7/8 inch; 

Banjo port diameter is from 10 to 26 mm

one piece hydraulic hose fittings

Hot Tags: one piece hydraulic hose fittings, China, manufacturers, suppliers, custom, brass, swagelok, Parker, Stauff, Brennan, stainless steel

Previous: No Information

Next: One Piece Hose Flange Fittings